Compleated the plumbing and am working on the electrical connections

Spent the day under the car bolting up the skid plate and re-installing the wheel well liners. Then I moved on to start the wiring process. It is quite complicated as the entire process is controlled by a small computer that receives signals from the coolant and grease lines so it knows when to switch from diesel to grease and back. Everything has to be grounded and the wires have to pass through the fire wall and into the dash of the car. To do this I removed the underside of the dash and located a hole in the fire wall that I could pass the wire harness through and make all my connections in the engine. Good connections are essential.